georeferenced image had to be rerectified

Comments

• global_mapper Administrator Posts: 17,238

  June 2012 edited June 2012

  Craig,
  
  I've never heard of anything like that, is the problem reproducible? Which v13 version are you using? If not v13.2 I would first suggest getting that from the links below:
  
  32-bit: http://www.globalmapper.com/downloads/global_mapper_setup.exe
  64-bit: http://www.globalmapper.com/downloads/global_mapper_setup_64bit.exe
  
  Thanks,
  
  Mike
  Global Mapper Guru
  gmsupport@bluemarblegeo.com
  http://www.globalmapper.com
• craigdoll Global Mapper User Posts: 30Trusted User

  June 2012 edited June 2012

  it is v13.2, and I will try to do another one later tonight and see what happens
• craigdoll Global Mapper User Posts: 30Trusted User

  June 2012 edited June 2012

  Yes the same thing happened exactly the same way...
  the georeferenced image had to be rerectified, by accepting the same values loaded the first time
• global_mapper Administrator Posts: 17,238

  June 2012 edited June 2012

  Can you provide a workspace with the image after rectification (but before re-rectification) and the image being rectified so that I can try and reproduce this? I'm not able to reproduce this just trying it myself. Actually if the image is too large just the workspace might be enough as it would have your control points and projection information.
  
  Thanks,
  
  Mike
  Global Mapper Guru
  gmsupport@bluemarblegeo.com
  http://www.globalmapper.com
• craigdoll Global Mapper User Posts: 30Trusted User

  July 2012 edited July 2012

  Rectify001.jpg
  Here is the rectification window, with fairly accurate point matching
  
  Rectify004.jpg
  Here is the Home Screen after rectification...it is a speck in the bottom right, and the map is in the upper
  
  
  Rectify007.jpg
  Here it is in the proper place after re-rectifying, it even works if I caccel the re-rectification

  Rectify001.jpg 197.8K

  Rectify004.jpg 49.5K

  Rectify007.jpg 199.4K
• global_mapper Administrator Posts: 17,238

  July 2012 edited July 2012

  When the map is a spec in the bottom right, what does the metadata dialog for the layer show? I'm wondering if maybe it is treating the lat/lon coordinates as UTM for some reason or something.
  
  Thanks,
  
  Mike
  Global Mapper Guru
  gmsupport@bluemarblegeo.com
  http://www.globalmapper.com
• craigdoll Global Mapper User Posts: 30Trusted User

  July 2012 edited July 2012

  I will check for you on the weekend Mike
  Thanks
  How does one add a signature
• global_mapper Administrator Posts: 17,238

  July 2012 edited July 2012

  I think if you click 'Settings' on the top, then 'Edit Signature' on the left, you can edit your signature.
  
  Thanks,
  
  Mike
  Global Mapper Guru
  gmsupport@bluemarblegeo.com
  http://www.globalmapper.com
• craigdoll Global Mapper User Posts: 30Trusted User

  July 2012 edited July 2012

  Mike, I'm not seeing it anywhere, I must have some different config somewhere with all my issues
  no Sig opt.jpg

  no Sig opt.jpg 160.5K
• global_mapper Administrator Posts: 17,238

  July 2012 edited July 2012

  That is different. On mine it's right under Edit Avatar. We don't run the site so I'm not sure, try global_flyer or email paul@globalmapperforum.com, he is the Admin of the site.
  
  Thanks,
  
  Mike
  Global Mapper Guru
  gmsupport@bluemarblegeo.com
  http://www.globalmapper.com