exporting water level

bing66
bing66 Global Mapper User
edited May 2008 in Technical Support
is it possible to export a mesh with added water levels included in the mesh when you add water levels in the verticles options tab

Comments

  • global_mapper
    global_mapper Administrator
    edited May 2008
    While that is not directly possible, what you could do in order to achieve that is to open the Control Center, select the elevation layer(s), press Options, then go to the Adjust Elevations tab and change the minimum valid elevation to the desired water level and also check the box to clamp out of range values. Then any elevations in your grid below the water level will be snapped to the water level and will also be exported that way to any exported mesh files.

    Let me know if I can be of further assistance.

    Thanks,

    Mike
    Global Mapper Support
    support@globalmapper.com
  • bing66
    bing66 Global Mapper User
    edited May 2008
    that worked fine, cheers, just having problems getting the dxf face file into lightwave now, have done it before, but wont work now for some reason
  • global_mapper
    global_mapper Administrator
    edited May 2008
    Sorry, I'm not familiar with Lightwave so I can't be of any help there.

    Thanks,

    Mike
    Global Mapper Support
    support@globalmapper.com

Categories

In this Discussion