How to Batch convert UTM Co-Ordinates into Latitude and Longitude

gs7gs7 Global Mapper UserPosts: 3
edited August 2014 in Technical Support
Hi All,

I Trying to Batch convert UTM Co-Ordinates into Latitude and Longitude But i Unable to convert it
Please Help
input "Csv" output "Csv"

Easting Norting
220737.5948 1934807.586
220825.2965 1934792.55
220858.5769 1934783.557
220887.8623 1934774.058
220921.0509 1934761.287
220953.9716 1934746.354

Zone -44
Projection - WGS84

Comments

  • JeffH@BMGJeffH@BMG Global Mapper Developer Posts: 324Trusted User
    edited August 2014
    Hi gs7,

    First, are you able to load this file correctly? I made a CSV file with the following lines:
    [FONT=courier new][COLOR=#333333]Easting Northing [/COLOR]
    [COLOR=#333333]220737.5948 1934807.586[/COLOR]
    [COLOR=#333333]220825.2965 1934792.55[/COLOR]
    [COLOR=#333333]220858.5769 1934783.557[/COLOR]
    [COLOR=#333333]220887.8623 1934774.058[/COLOR]
    [COLOR=#333333]220921.0509 1934761.287[/COLOR]
    [/FONT][COLOR=#333333][FONT=courier new]220953.9716 1934746.354[/FONT][/COLOR]
    


    I loaded this as a point file, using the "X / Easting / Longitude Coordinate First" setting. The Projection is UTM, Datum is WGS84, and the Zone is -44. This loaded fine.

    After that, I set the current projection (Tools / Configure / Projection) to "Geographic (Latitude / Longitude)", Datum is still WGS84, Planar Units = "ARC DEGREES". Then I exported using File / Export / "Export Vector / LiDAR Format", format is CSV, Field Separator is "Space", "Format Lat/Lon Coordinates with Position Display Format" is unchecked. The resultant CSV file is as follows:

    [FONT=courier new]LONGITUDE LATITUDE[/FONT][FONT=courier new]72.6535372097 -72.5095752524[/FONT]
    [FONT=courier new]72.6544816954 -72.5096963229[/FONT]
    [FONT=courier new]72.6553062727 -72.5098169197[/FONT]
    [FONT=courier new]72.6562324878 -72.5099713785[/FONT]
    [FONT=courier new]72.6571418975 -72.5101446774[/FONT]
    


    Please let us know if this doesn't work for you.

    Thanks,

    ~Jeff
  • gs7gs7 Global Mapper User Posts: 3
    edited August 2014
    Jeff
    it worked for me i appreciate you to your Help
    :)
Sign In or Register to comment.